Article-No.:
78893
MaxLED 250
LED Strip
Night Comfort Basic Set
1m IP44 4W 300lm/m 30 LEDs/m 2700K 12VA
1m IP44 4W 300lm/m 30 LEDs/m 2700K 12VA
- Color temperatur: 2700K - Warm white
- Rear self-adhesive for simple installation
- Complete set incl. strip and power supply
MaxLED 250 LED Strip Night Comfort Basic Set 1m IP44 4W 300lm/m 30 LEDs/m 2700K 12VA
The MaxLED Night Comfort set for single beds makes getting up in the night much easier. The self-adhesive strip and the sensor are simply attached under both sides of the bed and an illumination time of between 30 seconds and 6 minutes is set manually. The sensor only switches on the light in darkness, to prevent unwanted lighting during the day. When the sensor detects movement, it activates the lighting, allowing safe navigation through the room. The strip emits an indirect, glare-free light.
- Color temperatur: 2700K - Warm white
- Rear self-adhesive for simple installation
- Complete set incl. strip and power supply
- IP protection: IP44 splash-protected
- Flexible material for mounting on flat or curved surfaces
- Easy plug-in system for hassle-free assembly
- A dusk sensor automatically switches on the light as soon as darkness begins to fall.
- Automatic switching with integrated motion detector
| Dimension | |
|---|---|
| Dimensions (Height x Width x Depth) | H: 3 T: 12,5 mm |
| Length | 1 m |
| Design and Material | |
|---|---|
| Colour | Silver |
| Material | Plastic |
| Installation | |
|---|---|
| Length max. | 2 m |
| Connections | |
|---|---|
| Transformator plug | Transformator plug |
| Plug | Euro flat plug (type C-CEE 7/16) |
| Energy consumption | |
|---|---|
| Energy efficiency (A to G) | G |
| Features | |
|---|---|
| Sensors | Twilight-controlled motion detector (IR) |
| Service life | |
|---|---|
| Lifetime | 30000 h |
| Light Characteristics | |
|---|---|
| Colour temp. | 2700 K |
| Usable luminous flux | 300 lm |
| Luminous flux LED module | 300 lm |
| color temp | 2700 K |
| Color rendering index | > 80 Ra |
| Lamp Features | |
|---|---|
| Component parts | 4 W |
| Technique | LED |
| IP protection | IP44 |
| Dimmable | No |
| Inclusive lamp | yes |
| Number of component parts | 1x |
| protection class | protection class II |
| Number of LED's per meter | 30 |
| Replacable | 3 Lightsource is not replaceable, the complete lighting must be replaced.|4 Control gear is replaceable without damage the lighting fixture by enduser. |
| Power consumption | 5 W |
| Transformer | |
|---|---|
| Transformer power | 12 VA |
