The 24 V DC power requirements of the Plug & Shine outdoor LED light system make this system perfectly safe for kids and pets. It is completely weatherproof and super easy to set up: simply connect cables, luminaires and any other accessories with each other.
Create the garden illumination you always wanted - there is no limit to what you can do.
It really couldn't be easier: Position the luminaires where you want them in the garden, set up a suitable cable system with a maximum length of 50 metres, and select a transformer to accommodate the total output. Plug the system into your outdoor mains socket and you're done!
It couldn't be easier to get started with our Plug & Shine garden lighting system:
Getting Started 1
Plug & Shine Starter Sets
Bring beautiful light to your garden with one of our basic starter sets. They contain everything you need to start creating your very own garden lighting system.
Our configurator will help you create your very own, completely unique garden lighting system. Here you will find the luminaires, components and cable lengths to suit your garden.
Combine Plug & Shine components any way you like and add more at any time:
Glare-free in-ground luminaires for garden paths and driveways, or decorative flower bed and patio lights
Drive-over on-ground luminaires for your driveway
Recessed or surface-mounted light bars for walls, hedges and façades, or to highlight special features
Adjustable garden spots to illuminate plants or objects in your garden of any height and width
Bollard lights as a safety feature for paths and walkways
Supply cables in various lengths and a selection of plug types
Transformer for various system sizes
A controller for switching and dimming of downstream luminaires (remotely controlled individually or in groups)
Installation tip: The power supply cables can be routed above ground. Forget about digging up your garden!
Plug & Shine: Frequently Asked Questions
Yes. All products function with 24 V DC and can be combined what ever way you like up to the max. load capacity of the transformer.
The only exception here is the Plug & Shine motion sensor: it does not respond to control commands from the Zigbee remote control or the gateway.
No, some luminaires of the Plug & Shine series are not dimmable. You will find information about the dimming capability in the online shop product description ("Dimmable Yes/No").
No luminaire must be installed further than 50 m away from the transformer. <br>
There is no minimum depth requirement for the installation, as it is a low-voltage system. The cables can also be routed above ground i.e. in a flower bed or under plants.
Yes, you can use multiple RF remote controls. For Zigbee, however, we recommend one remote control per system.
No. Our preconfigured cables come with a special plug connection to make the system waterproof. We don't recommend combining the system with other cables.
The number of controllable luminaires depends on their output. The maximum capacity of the installed transformer must not be exceeded.
Important: The Zigbee controller cannot switch more than 75 W.
Yes. The RF controller and the Zigbee controller come with a memory function.<br>
You can install max. two 5 metre strips in sequence.
There is a twilight and motion sensor with Item No. 18012, for which you will need the Zigbee controller with Item No. 93999. The sensor will not respond to the Gent remote control or gateway. Only one motion sensor can be coupled with the controller 93999. <br>
The exact dimensions of the cables can be found on the product page on an image of the relevant product.
No. The strips cannot be shortened.
No. A combination with other product is not possible, as we use a custom connector on the low-voltage side.
