- Indoor Lighting
-
Outdoor Lighting
- Plug & Shine Light System for the Garden
- Bollard Lights
- Garden Spotlights
- Outdoor Wall Lights
- Outdoor Ceiling Lights
- Outdoor LED Strips
- Outdoor Fairy Lights
- Portable Battery-Powered Lights
- House 230 V
- Solar Lights
- Insect-Friendly Outdoor Lights
- Seawater-Resistant Outdoor Lights
- Park + Light System
- Preisattraktive Sets außen
- Accessories Outdoors
- Uses
- Light Bulbs
- Smart Home
- % Outlet
- Inspiration
- Advice
- Service
Outdoor LED Panels
Homogeneous illumination outdoors
Filter products
Min - Max
-
–
Min - Max
-
–
Sort by:
Questions and answers about House 230V
Is there anything to bear in mind when connecting house 230v?
The house 230v range is connected directly to the 230V mains supply, without the need to install a power supply unit.
Is the glass in the square recessed floor light, 230V (item no. 93993), clear or frosted?
The glass in the 93993 recessed floor light is frosted in the current production run. The pre-production batch with the same item number was manufactured with clear glass.
Can an earth cable be connected directly to the 230V recessed floor lamps?
None of the 230V recessed floor lamps in the Paulmann range are designed to be connected to an existing underground cable. Here, a junction box must be fitted and a suitable flexible conduit used.
Please contact your local electrician.
Why is my house wall light with a twilight sensor flashing?
If the twilight sensor in the light fitting detects reflected light, this may be interpreted as daylight and the lights will switch off again. The lights are particularly sensitive if they are fitted too close to a canopy or if the external wall has very light-coloured render.
What does the small grey dot on the Ronea outdoor wall light (94332/94333), near the fixing screw, mean?
This is the lights’ twilight sensor.
How does the Rio socket column with timer (item no. 94314) work?
The timer is a mechanical device that has a switch for every 15 minutes of the day. Before use, the current time must be set. To do this, turn the ring clockwise until the correct time is aligned with the small arrow/triangle. For each time slot during which the power is to be switched on, the corresponding switch must be pushed outwards. For example, to switch the power on between 8 and 9 o’clock, the four switches between 8 and 9 should be set to the outer position.
How can the LED module be replaced in the Durea recessed floor light (94654/94655/94656)?
The LED module in the Durea recessed floor light is fixed and cannot be replaced.
How are cables laid in a house 230v domestic installation?
A 230V underground cable must be laid in sand at least 60 cm below ground level to ensure it is frost-proof. Please contact your local electrician.
Floor mount 94533, 94537, 94536 (Flarea)
The tin can be secured with 2 screws
ModuShine
ModuShine is an outdoor light that can be customised to suit your preferences. Installation requires a light base, a shade and a light bulb.
Rio socket column
The Rio socket column is available in various versions with 2 sockets (94657) or 4 sockets (94313); a timer (94314) or a twilight sensor (94315). You can find more information here: https://de.paulmann.com/outdoor-lights/zubehoer-outdoors/