Article successfully added.

LED module Coin for recessed luminaires clear 7 W 3-piece set, dimmable, warm white

  • 938.38
  • LED module with junction box, incl. double quick terminal to loop through
  • Material: Aluminium, Polycarbonat
  • Color: Grey
You want to use the innovative Coins in combination with your existing lighting installations? No...more
LED module Coin for recessed luminaires clear 7 W 3-piece set, dimmable, warm white
You want to use the innovative Coins in combination with your existing lighting installations? No problem! If you have already installed recessed spotlights for standard lamps with a diameter of 51 mm, you can simply switch over to the super flat and energy-saving LED modules. The old lamp is removed and the Coin connected with quick clips and put into operation!
  • LED module with junction box, incl. double quick terminal to loop through
  • Material: Aluminium, Polycarbonat
  • Color: Grey
  • Energy-saving LED technology (conserves up to 80% energy in comparison to conventional light bulbs)
  • Diameter: 51mm
  • mounting depth: 45mm
  • operating voltage: 230 V
  • protection class II
  • Color temperatur: 2700K - Warm white
  • With clear safety glass
  • Incl. junction box with double quick clamp for feeding through wires
Technical details "LED module Coin for recessed luminaires clear 7 W 3-piece set, dimmable, warm white"
Rated life time: 30000 h
rated beam angle: 110 °
Rated power: 7 W
lifetime: 30.000 h
Inclusive lamp:
type: Special lamps
form: round
Ø: 49,5 mm
Starting time up to 60% luminous flux: <2 s
Dimensions (Height x Width x Depth): H: 35 mm
Farbtemperatur: 2,700 K, 2700 K
WEEE-Reg.-No: DE 39236390
starting time <: 2,0 s
Rated luminous flux (Lumen): 3x425 lm
useful luminous flux: 410 lm
can be used with the following dimmers: RL Merten MEG5133-0000, RLC Müller Paladin 873 030 LED
Installation site (recommendation): Ceiling mounting
Incandescent Equivalent: 36 W
energy efficiency (A++ to E): A
Beam angle: 110 °
Material: Plastic
Dimmable: Yes
protection class: protection class II
Colour: Clear
component parts: 7,2 W
Number of component parts: 3x
operating voltage: 230 V
Power consumption: 21 W
Lamp lumen maintenance factor 6000h: 90 %
luminous flux at the end of lamplife: 85 %
Number of switching cycles >=: 15000
Power factor: 0,7
Energy consumption: 7 kWh_1000h
marketing type: Set
colour consistency: <= 3 Step of the MacAdam ellipse
Color rendering index: > 80 Ra
Technique: LED
Viewed