Article successfully added.

Infrared switch sensor ON/OFF recessed for maximal 60W, 75W or 250W

  • 704.51
  • Proximity sensor switches on and off when approached to within 3 cm
  • max. 60 W capacitive load (electronic ballasts)
  • max. 75W inductive load (converter transformer)
You urgently need light, but your hands are wet, dirty or full? A PIR sensor can be used to...more
Infrared switch sensor ON/OFF recessed for maximal 60W, 75W or 250W
You urgently need light, but your hands are wet, dirty or full? A PIR sensor can be used to switch your light installations on and off with contact and through proximity. It is therefore an ideal addition to your cabinet lighting in the kitchen and in the bathroom and LED strips with which items of furniture can be effectively highlighted. The sensor is installed in an easily accessible position in a 14 mm drill hole. The cable can be routed behind the cabinet, the showcase or the shelving unit and be connected to the supplied switch unit there. As a result, the entire wiring is invisible.
  • Proximity sensor switches on and off when approached to within 3 cm
  • max. 60 W capacitive load (electronic ballasts)
  • max. 75W inductive load (converter transformer)
  • max. 250W for resistive load (light bulbs)
Technical details "Infrared switch sensor ON/OFF recessed for maximal 60W, 75W or 250W"
Mounting depth: 12 mm
MM symbol: MM symbol
Ø: 17,5 mm
Maximum wattage: max. 60 W
Dimensions (Height x Width x Depth): H: 19 x B: 85 x T: 36 mm
WEEE-Reg.-No: DE 39236390
depth of hollow wall: 12 mm
starting time <: 0,0 s
depth of hollow wall: 12 mm
Sensors: Proximity switch
protection class: protection class II
Mounting hole: 14 mm
Colour: White
Material: Plastic
operating voltage: 230 V
Installation site (recommendation): Universal
marketing type: Accessories
Technique: Accessories without bulbs
Viewed