WaterLED Motion Color set 4.8 m 9.8 W with colour change function

WaterLED strips are coated on all sides and ideal for use outdoors. Various colour mixes can be controlled in dynamic rhythms using the supplied remote control. Brightness can also be dimmed. In each case 3 LEDs can be switched off segment by segment from the end of the strip – the length can also be varied electronically as required. Of course, the strip can also be cut off at the corresponding markings with a scissors, but it is then not possible to reconnect the separated ends. After the shortening the supplied end cap of silicone must be mounted to the interface to maintain the IP protection. The strips are waterproof during temporary immersion (IP67). The sensor, which is controlled via the infra-red remote control, and the strip are fastened using screw-type cramps to provide ideal hold. The sensor, which is controlled via the infra-red remote control, and the strip are fastened using screw-type cramps to provide ideal hold.